Hi,
got a problem with connecting scart <-> pc.
Adapter is programmed, led is blinking with every key press on the remote.
OS is linux, serial is /dev/ttyUSB0
With windows on the same PC I could programm the betty's with betty heaven so the USB->serial is working.
Mpdtools gives connections errors. Normal firmware also don't give any output.
I've connect the RX (square hole) of the scart adapter to pin 2 of a db9 connector, TX to pin 3 and gnd to pin 5.
Must the RX of the scart adapter be connected with the RX or TX of the PC? Right now I've RX - RX and TX - TX. But nothing on the terminal screen.
What am I doing wrong.
